Introduction
Utility sink refinishing costs range from $300 to $825 on average. The price of professional reglazing depends on the material being treated. Most homeowners pay around $365 to $550 for an average single sink refinishing job. Large, heavily damaged commercial-grade sink refinishing can cost $1255+. The process involves extensive labor, chemical cleaning and etching of hard water stains. Revive your laundry room sinks with Bath Brite’s reglazing services for lasting beauty and strength.
Laundry Room Utility Sink Refinishing Costs By Materials
Porcelain/ Ceramic
Standard porcelain or ceramic laundry sink resurfacing costs sit on the lower end, $225 to $730 on average. Deep cracks or missing enamel require spot filling and patching before the epoxy or polyurethane topcoat is applied.
Concrete
Refinishing concrete utility sinks typically costs between $300 and $855. Classic heavy basins often suffer deep erosion, pitting, and cracking from decades of use. Vintage concrete/cement tub repairs cost more than other materials.
Cast Iron
Heavy cast iron utility sink refinishing costs between $445 and $800. Deep rust, severe corrosion, and widespread cracking in large and deep sinks can drive up repair and refinishing costs more than in small drop-in sinks.
Stainless Steel
Reglazing a stainless steel laundry room utility sink costs between $300 and $675. The process involves deep cleaning, buffing, restoring, or coating with specialized primers and a top coat if the sink is discolored or pitted.
Acrylic / Fiberglass
Acrylic or fiberglass utility sink refinishing costs can be between $310 and $625. Costs depend on the extent of surface damage, quality of surface prep and the choice of coating materials such as
- Epoxy coatings
- Gelcoat restoration
- Acrylic enamels and polyurethane
Composite / Granite
Resurfacing a composite or granite resin laundry room utility sink costs range from $395 to $760. Repair costs depend on the type of surface damage such as
- White haze or chalkiness
- Scratches and etching
- Deep gouges, cracks or chips
- Thermal shocks or chemical burns
DIY Refinishing Kit
Costs between $50 and $150 for speciality epoxy, acrylic or specialized resin utility sink refinishing. Successful DIY utility sink refinishing depends on
- Base material and type of refinishing kit
- Surface preparation
- Environmental control
- Application technique
- Post-cure usage constraints
Factors Influencing Laundry Room Sink Refinishing Costs
How much to reglaze a utility sink depends on
Sink Material
Porcelain, cast iron, stainless steel or concrete laundry sink refinishing: all materials require specialized primers and coatings.
Pre-Cleaning Requirements
Laundry room utility sinks accumulate chemical residues, dirt and grime buildup. Heavily stained laundry sink repairs involving mechanical degreasing or chemical stripping are expensive.
Size and Basins
A single basin utility sink costs less to refinish than a large double basin utility sink.
Extent of Damage
Structural crack repairs can add $50 to $120 per crack to your final bill. Deep erosion or widespread pitting requires extensive grinding and marine grade fillers before final coating can be sprayed.
Specialized Coatings
Specialized coatings are required to prevent detergents and bleach from damaging the new finish and can increase refinishing costs.
Labor
Per-hour labor rates are from $50 to $225 per hour. Flat rate can be from $100 to $350 for the reglazing process, depending on your location.
What’s Included in Laundry Room Refinishing
A step by step utility sink restoration process to repair, prep and coat involves
- Masking the surrounding area
- Hardware and drainage removal or taping
- Deep cleaning and mold/mildew treatment
- Repairing cracks, chips and erosion
- Sanding and surface etching
- Primer application
- Top coat finish application
- Clear coat application
- Curing and reassembly
Laundry Sink Refinishing vs Replacement
Laundry room utility sink refinishing costs between $300 and $825. Sink replacement averages $350 to $1500+ installed, including demolition, hauling and modified plumbing.
Choose Refinishing If
- You have a classic, heavy duty, hard-to-replace vintage sink
- The damage is purely cosmetic
- You want to avoid demolition and plumbing headaches
- You want to save on labor and new installation costs
Choose Replacement If
- The sink is severely cracked or rusted
- You have a cheap plastic or polypropylene sink
- There is structural or functional failure
- You want to upgrade your layout
- Buying a new unit is cheaper than labor intensive repairs
Conclusion
Reglazing laundry room utility sinks is a cost-effective way to refresh heavily used surfaces without the high costs of replacement or modifying complex plumbing fixtures. Repair costs average $300 to $825, depending on the type of damage, sink material, location of the flaw and crack depth.
Worn or stained basins? Forget the high costs of tear-out and labor. Bath Brite restores your laundry room utility sinks that can withstand daily wear and tear.
FAQs
How long does the laundry room utility sink refinishing take?
Professional refinishing or reglazing sinks takes 2 to 5 hours of active work. Curing time is 24 to 72 hours to harden the finish before you can run water and expose the surface to detergents.
How long does a refinished utility sink last?
A professionally refinished sink lasts 10 to 15 years with proper care. Avoid harsh chemical bleaches, abrasive powders, metal scrubbers or dropping heavy metal buckets that can chip or dull the new coating.
What is the best material for a laundry room?
The best laundry sink is a single-bowl 18-gauge stainless steel or fireclay sink, which offers unmatched durability and resistance to stains and harsh chemicals without peeling or fading.
